- Главная
- Приложения
- Здоровье и фитнес
- myGeonaute connect
О myGeonaute connect
The myGeonaute connect application allows you to pair with and view GPS ONmove 200, ONmove 220 and ONmove 500 watch data in addition to the connected Scale 700 scales.
NOTE: For GPS Watches, our new DECATHLON CONNECT application replaces this one (also available on the Play Store).
If you have a connection or synchronization problem with your scale, follow these instructions:
1- Check the battery of your scale. Replace if necessary.
2- RESET the scale by following the video:
https://www.youtube.com/watch?v=xnjr3Mgxm8k
3- For good use, place the scale on "hard" and perfectly flat ground.
4- Charge your phone to more than 50% (below 50%, the phone may deactivate some necessary features).
5- Check that the phone has all the latest updates (Application, OS, System, etc.).
6- "Forget" the scale from the bluetooth settings and deactivate bluetooth on the phone.
7- Uninstall the My geonaute Connect application from your phone (in order to empty the cache memory).
8- Switch off then switch on the phone again.
9- Activate bluetooth on the phone.
10- Check that the phone is properly connected to an internet network (4G or WIFI).
11- Install the My Geonaute Connect application.
12- Launch the application, log into your account and add the scale as a new product (following the steps on the screen).
13- Check that the location and storage settings on the phone are activated for the application.
14- If possible depending on the phone model, prevent the application from going into standby mode (see authorizations). Also deactivate the energy saving function for the app.
if after these checks, the problem remains, contact our support team here:
https://support.decathlon.co.uk/
Features:
- Wireless transfer: synchronise your weight with your smartphone using Bluetooth Smart
- Monitor the long-term development of body parameters: Save measurements and view the long-term development of body parameters, weekly, monthly and annually. Understand your body at a glance with the body composition pie chart.
- Complete view of daily energy requirements: Your Scale 700 automatically calculates your basal metabolic rate (energy requirements when resting) and adds this to the calories used during the day's physical activity. It is also possible to completely view your daily calorie expenditure.
- Calculation of Body Mass Index (BMI)
NOTE: For GPS Watches, our new DECATHLON CONNECT application replaces this one (also available on the Play Store).
If you have a connection or synchronization problem with your scale, follow these instructions:
1- Check the battery of your scale. Replace if necessary.
2- RESET the scale by following the video:
https://www.youtube.com/watch?v=xnjr3Mgxm8k
3- For good use, place the scale on "hard" and perfectly flat ground.
4- Charge your phone to more than 50% (below 50%, the phone may deactivate some necessary features).
5- Check that the phone has all the latest updates (Application, OS, System, etc.).
6- "Forget" the scale from the bluetooth settings and deactivate bluetooth on the phone.
7- Uninstall the My geonaute Connect application from your phone (in order to empty the cache memory).
8- Switch off then switch on the phone again.
9- Activate bluetooth on the phone.
10- Check that the phone is properly connected to an internet network (4G or WIFI).
11- Install the My Geonaute Connect application.
12- Launch the application, log into your account and add the scale as a new product (following the steps on the screen).
13- Check that the location and storage settings on the phone are activated for the application.
14- If possible depending on the phone model, prevent the application from going into standby mode (see authorizations). Also deactivate the energy saving function for the app.
if after these checks, the problem remains, contact our support team here:
https://support.decathlon.co.uk/
Features:
- Wireless transfer: synchronise your weight with your smartphone using Bluetooth Smart
- Monitor the long-term development of body parameters: Save measurements and view the long-term development of body parameters, weekly, monthly and annually. Understand your body at a glance with the body composition pie chart.
- Complete view of daily energy requirements: Your Scale 700 automatically calculates your basal metabolic rate (energy requirements when resting) and adds this to the calories used during the day's physical activity. It is also possible to completely view your daily calorie expenditure.
- Calculation of Body Mass Index (BMI)
Обновление myGeonaute connect 3.7.2
Discover the new Decathlon Connect application for your connected sports products.
Читать далее
Предыдущие Версии Больше
myGeonaute connect
3.7.2
APK
January 5, 2021
49.29 MB
Requires Android: Android 4.3+
Screen DPI: 120-640dpi
SHA1: 329fd335a1cc9498e06fd8f17e78840a121c2337
Size: 49.29 MB
What's New:
Discover the new Decathlon Connect application for your connected sports products.
myGeonaute connect
3.7.1
APK
December 15, 2020
49.29 MB
Requires Android: Android 4.3+
Screen DPI: 120-640dpi
SHA1: cf95f7cabea8d5ab57faf7fbf1c6145f754f5bf2
Size: 49.29 MB
What's New:
Discover the new Decathlon Connect application for your connected sports products.
myGeonaute connect
3.6.7.3
APK
November 1, 2019
47.33 MB
Requires Android: Android 4.3+
Screen DPI: 120-640dpi
SHA1: 2270ad27e5ea220ffb77f05b98afe089f1090ffc
Size: 47.33 MB
What's New:
Minor bug fixes
myGeonaute connect
3.6.7.2
APK
April 16, 2019
47.33 MB
Requires Android: Android 4.3+
Screen DPI: 120-640dpi
SHA1: 014ab7a4710457e767c8c36196bc7f3660cb8b3f
Size: 47.33 MB
What's New:
We fixed several problems:
- Bug to display statistics.
- Bug to synchronize activities to STRAVA.
- Bug to display statistics.
- Bug to synchronize activities to STRAVA.
Больше Информации
Имя пакета:
Категория:
Дата обновления:
2021-03-26
Последняя Версия:
3.7.2
Требуется обновление:
Требования:
Android 4.3+
Пожаловаться: