PRTG Mobile Probe
9.1 4
v14.2.8 by Paessler AG
關於 PRTG Mobile Probe
PRTG Mobile Probe（包名：com.paessler.androidprobe）開發者是Paessler AG，PRTG Mobile Probe的最新版本14.2.8更新時間為2015年08月10日。PRTG Mobile Probe的分類是工具。您可以查看PRTG Mobile Probe的開發者下的所有應用。目前這個應用免費。該應用可以從APKPure.fo或Google Play下載到Android 2.0+。apkpure.fo的所有APK/XAPK文檔都是原始文檔並且100%安全下載的資源。
PRTG Mobile Probe for Android 2.0+ devices let you gather local monitoring data with your mobile device in a quick and easy way. Please send your feedback, comments, and suggestions to support@paessler.com.
A PRTG Mobile Probe sees your network from the mobile perspective and provides you monitoring data from just this point of view. You can review the monitoring results in PRTG Network Monitor’s web interface, as well as the most recent results directly on the PRTG Mobile Probe.
Features currently include:
* Monitoring WiFi coverage
* Performing pings to other devices or services from the mobile point of view
* Monitoring loading times of webpages via HTTP from the mobile point of view
* Monitoring environmental data such as light intensity, temperature, pressure, or humidity, depending on available measuring components on your Android device
* Showing location of the device (OS 2.3 or later) and its battery status
Requirements and Setup:
* You need to run an installation of PRTG Network Monitor version 13.4.7 or later.
* Your Android device should be configured to not turn WiFi off when it sleeps.
* The PRTG Core Server must be accessible from the network your device is connected to.
* Under "Setup | System Administration | Probes", you will need to enter either "any" or an appropriate IP range under "Allow IPs" and the “Small Probes” setting must be set to allow Small Probes to connect. Please note that we do not recommend relying on a VPN!
* Link up the Mobile Probe with your PRTG webserver by providing its address and access key.
* Acknowledge the new probe connection in PRTG’s web interface and create corresponding sensors for the mobile probe.
* For location monitoring you need OS 2.3 or later.
Known Bugs:
* Sometimes the countdown timer forgets how much time is remaining. It will be fixed in a future release.
* Certain devices are very aggressive about putting the WiFi radio to sleep. Please let us know if you see gaps in the results - we're still looking for a good solution.
For more information about PRTG Mobile Probe, please refer to our blog article and contact us via support@paessler.com.
A PRTG Mobile Probe sees your network from the mobile perspective and provides you monitoring data from just this point of view. You can review the monitoring results in PRTG Network Monitor’s web interface, as well as the most recent results directly on the PRTG Mobile Probe.
Features currently include:
* Monitoring WiFi coverage
* Performing pings to other devices or services from the mobile point of view
* Monitoring loading times of webpages via HTTP from the mobile point of view
* Monitoring environmental data such as light intensity, temperature, pressure, or humidity, depending on available measuring components on your Android device
* Showing location of the device (OS 2.3 or later) and its battery status
Requirements and Setup:
* You need to run an installation of PRTG Network Monitor version 13.4.7 or later.
* Your Android device should be configured to not turn WiFi off when it sleeps.
* The PRTG Core Server must be accessible from the network your device is connected to.
* Under "Setup | System Administration | Probes", you will need to enter either "any" or an appropriate IP range under "Allow IPs" and the “Small Probes” setting must be set to allow Small Probes to connect. Please note that we do not recommend relying on a VPN!
* Link up the Mobile Probe with your PRTG webserver by providing its address and access key.
* Acknowledge the new probe connection in PRTG’s web interface and create corresponding sensors for the mobile probe.
* For location monitoring you need OS 2.3 or later.
Known Bugs:
* Sometimes the countdown timer forgets how much time is remaining. It will be fixed in a future release.
* Certain devices are very aggressive about putting the WiFi radio to sleep. Please let us know if you see gaps in the results - we're still looking for a good solution.
For more information about PRTG Mobile Probe, please refer to our blog article and contact us via support@paessler.com.
PRTG Mobile Probe 14.2.8 更新
Added a "probe status" sensor
查看更多
PRTG Mobile Probe 資訊
更多資訊
更新日期:
2015-08-10
最新版本:
14.2.8
請求更新:
系統要求:
Android 2.0+
舉報:
安全下載
apkpure.fo和該應用的下載連結是100%安全的。apkpure.fo上列出的所有應用下載連結均來自Google Play Store或由用戶提交。對於來自Google Play商店的應用，apkpure.fo不會對其進行任何形式的修改。對於用戶提交的應用，apkpure.fo會在網站上發佈之前驗證其APK簽名的安全性。